Christmas Tree Fires

12/17/2021 (Permalink)

Christmas trees are an excellent addition to the home decor for the holidays. Unfortunately, they do add a fire risk to your household typically from shorts in electrical lights. Take these steps to prevent such an accident from occurring.

• Keep Your Tree Watered

• A dry tree is more prone to being set on fire then a wet one
• If tree does catch on fire and it happens to be dry, it will burn up much faster and spread to its surroundings
• Keeping a tree properly watered can mitigate these disasters

• Properly Manage Candles

• FEMA states that half of all home decoration fires in December start from candles, try to keep them at least a foot away from the tree

• Properly Manage Lights

• Here are the tips suggested by the NFPA:

• Only purchase lights, electronic decorations and extension cords that are UL-Listed. (UL is a safety certification that say the lights have been tested and approved by a recognized safety-testing agency)
• Consider purchasing LED lights; they use less energy and run cooler than traditional incandescent lights.
• Keep the indoor lights, indoors. Putting indoor-only products outside in the weather can result in electric shock and fire hazards, so check the labels carefully to make sure your lights are safe to use outdoors. All outdoor lights should be plugged into GFCI outlets.
• Inspect for damage. Check all lights, electric decorations and extension cords for signs of damage to wire insulation, plugs, and bulbs. If the damage can be easily repaired, such as replacing a broken bulb, do not use the item until the repair has been made. If cords and plugs are damaged, discard and replace the decoration.
• Use wooden or fiberglass ladders when decorating outdoors. Metal ladders conduct electricity; using one could result in severe electric shock.
• Do not use staples, nails or tacks to hang electrical cords as these can pierce the protective insulation.
• Don’t overload outlets. No more than three strands of lights should be plugged into each electrical cord or outlet.
• Check lights often. Every so often, check holiday light wires to make sure that they’re not warm to the touch. Overheated wires can spark a fire.
• Always unplug lights before changing bulbs, replacing fuses, or making any other repairs. If you need to replace a bulb in a string of Christmas lights, make sure that the wattage rating of the replacement bulb you’re using matches that of the light strand. Using a bulb with too high a wattage can cause the light string to overheat, creating a fire risk.
• Turn off when not being monitored. Always turn off all Christmas lights and decorations before going to bed or leaving the house.

Should your home ever suffer fire damage, contact SERVPRO of Bangor/Ellsworth at (207)947-0400!  Let us help you make it "Like it never even happened."